Craftsman 315.212740 Operator's Manual page 23

Thissawhas
three scale indicators,two on the bevel
scale and one on the miter scale. After squadngadjust-
ments have been made, it may be necessary to loosen the
Indicator screws and reset them to zero.
FENCE
• BLADE
COMBINATION
SQUARE
MnER
TABLE
VIEWOFBLADE NOTSQUARE WITHMITER
TAm.E, A DJUSTMENTS AREREQUIRED
Fig. 32
_1= WARNING: Do not allow famlllarltywlth tools to
make you careless. Remember that e careless frec-
tion of a second is sufScient to inflict severe in)ury.
,_ WARNING: Ahvayswear safety goggle or safety
glasses with side shieldswhen operating tools. Fail-
ure to do so could resultIn oblects being thrown Into
your eyes resultingin possibleserious injury.
_, WARNING: Do not usa any attachments or acces-
sories not recommended by the manufacturer of
this tool The use of attachments or accessoriesnot
recommendedcan result in serious personalinjury.
CAUTION: Do not start the compound miter saw
wfthout checkingfor interferencebetween tile bIade
and the throat plate. Damage could resultto the
blade if it strikesthe throat plate dudng operation of
the saw.
APPLICATIONS
This product has been designed onlyfor the purposes
_sted _,ow;
• Crosscutting wood and plastic
• Crosscuttb_gmiters, joints,etc. for picture frames
moldings,door casings, and fine joinery
• Beret c_ttin9 and compound cu_n 9
NOTE. The blade provided is fine for most wood cutting
operations,but for fine joinerycuts or cuttingplastic, use
one of the acoesso_ blades availabk_from your nearest
Sears retail store.
A WARNfNG: Beforestarting any cutting operation,
clamp or bolt the compound miter saw to a work-
bench. Never operate the miter saw on the floor or in
a crouchedposition.Fallursto heed this warning can
resultin serious personalinjury.
23