Table of Contents
Advertisement
Introduction
CONGRATULATIONS on the purchase of your
Exmark Mower. This product has been carefully
designed and manufactured to give you a maximum
amount of dependability and years of trouble-free
operation.
This manual contains operating, maintenance,
adjustment, and safety instructions for your Exmark
mower.
BEFORE OPERATING YOUR MOWER,
CAREFULLY READ THIS MANUAL IN ITS
ENTIRETY.
By following the operating, maintenance, and safety
instructions, you will prolong the life of your mower,
maintain its maximum efficiency, and promote safe
operation.
If additional information is needed, or should you
require trained mechanic service, contact your
authorized Exmark equipment dealer or distributor.
Exmark parts manuals are available online at
http://www.exmark.com/manuals.htm
All Exmark equipment dealers and distributors are
kept informed of the latest methods of servicing
and are equipped to provide prompt and efficient
service in the field or at their service stations. They
carry ample stock of service parts or can secure them
promptly for you from the factory.
All Exmark parts are thoroughly tested and inspected
before leaving the factory, however, attention is
required on your part if you are to obtain the fullest
measure of satisfaction and performance.
Whenever you need service, genuine Exmark parts,
or additional information, contact an Authorized
Service Dealer or Exmark Customer Service and have
the model and serial numbers of your product ready.
Figure 1 identifies the location of the model and serial
numbers on the product. Write the numbers in the
space provided.
1. Model and serial number location
Model No.
Serial No.
3
Figure 1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VANTAGE and is the answer not in the manual?
Questions and answers
My mower has the ECS handles on it, does it require any different steps when changing the hydraulic oil and filter?
The provided context does not mention ECS handles or indicate that different steps are required for changing the hydraulic oil and filter based on handle type. Therefore, based on the available information, no different steps are specified.
This answer is automatically generated
My mower has gotten slower in reverse, what can I do to fix this
To fix a slow reverse issue on an Exmark Vantage mower, follow these steps:
1. Check the bypass valve – Make sure it is closed tightly. A loose valve can cause drive issues.
2. Inspect the drive or pump belts – Look for worn, loose, or broken belts and replace them if needed.
3. Check if belts are off a pulley – Reinstall the belt if it has slipped off and ensure pulleys are in correct working position.
4. Adjust tracking – Turn the left-hand adjustment rod in 1/4 turn increments in the direction needed until the mower tracks correctly.
These steps can help restore proper reverse speed and function.
This answer is automatically generated
Where is the bypass valve on my vantage
The exact location of the bypass valve on the Exmark Vantage is not specified in the provided information. The context only states that the mower is equipped with bypass valves and advises consulting the operator's manual for specific instructions on opening them.
This answer is automatically generated