Table of Contents
Advertisement
WARNING
CALIFORNIA
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Important: The engine in this product is not
equipped with a spark arrester muffler. It is a
violation of California Public Resource Code
(CPRC) Section 4442 to use or operate this
engine on any forest-covered, brush-covered, or
grass-covered land as defined in CPRC 4126.
Other states or federal areas may have similar
laws.
To acquire a spark arrester for your unit, see your
Engine Service Dealer.
This spark ignition system complies with the
Canadian standard ICES-002. Ce système d'allumage
par ètincelle de vèhicule est conforme à la norme
NMB-002 du Canada.
The enclosed Engine Owner's Manual is
supplied for information regarding The U.S.
Environmental Protection Agency (EPA) and
the California Emission Control Regulation of
emission systems, maintenance and warranty.
Keep this engine Owner's Manual with your unit.
Should this engine Owner's Manual become
damaged or illegible, replace immediately.
Replacements may be ordered through the
engine manufacturer.
Exmark reserves the right to make changes or
add improvements to its products at any time
without incurring any obligation to make such
changes to products manufactured previously.
Exmark, or its distributors and dealers, accept
no responsibility for variations which may be
evident in the actual specifications of its products
and the statements and descriptions contained
in this publication.
©2011 Exmark Mfg. Co., Inc.
Industrial Park Box 808
Beatrice, NE 68310
2
Contact us at www.Exmark.com.
Printed in the USA
All Rights Reserved
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VANTAGE and is the answer not in the manual?
Questions and answers
My mower has the ECS handles on it, does it require any different steps when changing the hydraulic oil and filter?
The provided context does not mention ECS handles or indicate that different steps are required for changing the hydraulic oil and filter based on handle type. Therefore, based on the available information, no different steps are specified.
This answer is automatically generated
My mower has gotten slower in reverse, what can I do to fix this
To fix a slow reverse issue on an Exmark Vantage mower, follow these steps:
1. Check the bypass valve – Make sure it is closed tightly. A loose valve can cause drive issues.
2. Inspect the drive or pump belts – Look for worn, loose, or broken belts and replace them if needed.
3. Check if belts are off a pulley – Reinstall the belt if it has slipped off and ensure pulleys are in correct working position.
4. Adjust tracking – Turn the left-hand adjustment rod in 1/4 turn increments in the direction needed until the mower tracks correctly.
These steps can help restore proper reverse speed and function.
This answer is automatically generated
Where is the bypass valve on my vantage
The exact location of the bypass valve on the Exmark Vantage is not specified in the provided information. The context only states that the mower is equipped with bypass valves and advises consulting the operator's manual for specific instructions on opening them.
This answer is automatically generated