Check Rotating Floor Brush And Drive Belt - Bissell AeroSwift™ Compact Vacuum User Manual

User's guide

Hide thumbs

Table Of Contents

Table of Contents

Maintenance & Care

clearing clogs

low suction or poor pickup may be due to

a clog in the vacuum cleaner. if you notice a

change in the sound of the motor, check for

clogs.

1. Turn power button off and unplug vacuum

from electrical outlet.

2. empty dirt bin and check the upper tank for

build up or clogs. Refer to cleaning upper tank

and inner cyclone section.

3. Check for clogs in the hose by removing the

hose from the upper hose inlet and base.

a. Grasp the hose collar tabs and turn hose

to the left and slide out.

b. Remove the hose from the base of the

unit and pull out of lower suction inlet.

c. straighten the hose and unclog with

a long, narrow object such as a broom

handle.

d. Reconnect the tabbed hose collar to the

upper suction inlet by pressing tabs to

insert and release tabs and rotate until

locked. Connect the lower hose back into

the lower base before operating.

notE: If removing the hose from the upper

hose inlet is difficult, remove the power cord

from the upper cord wrap along with the

dusting brush for easy access.

4. With the hose removed from the lower hose

inlet, check for clogs in the base hose connector.

a. if you notice a clog, remove the extension

tools from the storage post and remove

the screw in the lower hose base

connector with a Phillips screwdriver.

b. slide the lower hose collar up out of the

tabs and straighten the hose to unclog.

Use a long object to reach in and unclog.

c. Connect the lower hose collar by lining

up the tab grooves with the base and

pushing down. Replace the screw back

into the base to secure.