» Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present. SAVE THESE INSTRUCTIONS FOR FUTURE USE This model is for household use only. www.BISSELL.com...
Thanks for buying a BISSELL Adapt Ion XRT! ™ We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your vacuum works as well in two years as it does today, so this guide has tips on using (pages 6-9), maintaining (pages 10-13), and if there is a problem, troubleshooting (page 14).
Assembly WARNING Do not plug in your Adapt™ Ion XRT until you are familiar with all instructions and operating procedures. Your BISSELL Adapt™ Ion XRT vacuum comes in two easy-to-assemble components and does not require any tools to assemble. click Insert foot into body of the vacuum until you hear a “click”.
CHARGING Charging Blinking red light (1 second) Fully Charged Green light (on 10 minutes, then blinks every 1 minute) Charger/Battery Error Red and green blinking light, contact Consumer Care Battery/Motor Issue Red and green blinking light, contact Consumer Care www.BISSELL.com...
Page 7
Using your Adapt Ion XRT ™ To start cleaning select the power Select the brush button to turn the button to turn the unit ON. motorized Brush Roll OFF and ON. Select the +/- button to adjust the brush speed. www.BISSELL.com...
Page 8
Operating 2-Way Folding Handle Find the 2-Way Folding Handle Release Pull the trigger to fold the handle. Trigger located under the handle. Fold the handle forward to easily Fold the handle back for easy storage. clean underneath low places. www.BISSELL.com...
Page 9
firmly into the Hand Vacuum Nozzle. The Upholstery Tool has a felt strip that attracts pet hair while vacuuming The Crevice Tool reaches narrow spaces. upholstery. The Dusting Brush slides onto the Upholstery Tool for dusting on hard surfaces. www.BISSELL.com...
Dirt Tank. Grasp filter tabs and pull vertically to Replace Filter Assembly back into the Dirt remove Filter Assembly and empty dirt Tank and attach Dirt Tank to Hand Vacuum into waste container. until it snaps securely into place. www.BISSELL.com...
Page 11
NOTE: You may rinse the Filter and screen in warm water to clean. The Filter and screen need to be 100% dry before reuse. The key to maximum performance is having a clean Filter. Cleaning the Filter after each use will help your vacuum operate at peak efficiency. www.BISSELL.com...
Page 12
If the Brush Roll stops spinning due to debris, the LED light will turn solid red. Roll and turn unit ON to reset the brush. NOTE: Make sure the Brush Roll cover tab is locked back into place to prevent breaking or faulty Brush Roll. www.BISSELL.com...
Page 13
(one red, one white) from product. the vacuum. NOTE: Keep Battery Pack together – DO NOT separate individual batteries. For specific disposal instructions of batteries, please contact the RBRC (Rechargeable Battery Recycling Corporation) at 1-800-822-8837 or visit www.call2recycle.org. www.BISSELL.com...
Brush Roll Brush Roll needs to be reset Follow instructions on page 12 not turning Broken Brush Roll Belt Visit www.BISSELL.com or call 1-800-237-7691 to order replacement parts Dirt Tank is full Empty Dirt Tank Dirt Tank isn’t installed properly...
Service If your BISSELL product should require service: Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.