Bissell AEROSWIFT 1808 Series Assembly Instructions

QUICK START GUIDE
AEROSWIFT
VACUUM
Assembly Instructions
1. Insert handle into vacuum
base until you hear a "click".
PARTS INCLUDED
Upper
Handle
Base Unit
161-0235 06/16
®
2. Push lower cord wrap in, 3. Push hose end into
aligning two tabs, then turn vacuum base until you hear
clockwise (down) to lock a "click".
into place.
Hose
Cord Wrap
4. Wrap the hose up and
around, then slide end into
vacuum base.
Lower Combination
Dusting/Upholstery
Tool
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
TurboBrush®
2-in-1 Dusting Brush
5. Store the TurboBrush®
tool on front in holder, Store
Crevice Tool inside Extension
Wand on side of vacuum,
and store the 2-in-1 Dusting
Brush on the opposite side.
Extension Crevice Tool
Wand (stored inside wand)
1808 SERIES
Extension Wand
TurboBrush®
Tool