Advertisement
SAFETY FOR THE ADJUSTABLE WORK STAND
Always set up the adjustable
work stand on a hard, dry, flat, stable surface.
Be sure that the adjustable
work stand is fully opened and locked into the
proper "set-up"
position
before mounting
your bench-top
power tool to the
tabletop
assembly.
Follow all set-up
instructions
on pages 12 through 15 in this operator's
manual.
Always
properly
attach
the bench-top
power tool to the stand.
Do not attempt to use your work stand with a power tool until the tool is bolted
securely to the tabletop
assembly
according
to the instructions
on page 16 in
this operator's
manual.
Always
follow all safety rules and instructions
in the product manual for the power
tool when operating
a power tool that is mounted
on the adjustable
work stand.
Always
be that sure you have the proper space around the adjustable
work
stand to safely operate the power tool when setting up your adjustable
work
stand with a power tool
Always
check the adjustable
work stand and power tool for damaged
parts. If
any part is damaged,
it should be carefully checked to determine
if it will operate
properly and perform
its intended function before further use of the adjustable
work stand or the tool,
Keep your hands away from the cutting, drilling,
or sanding area.
Always
use clamps
or a vise to hold the workpiece
when practical.
Using
clamps or a vise to hold the workpiece
is safer than using your hand. It also
frees up both hands to operate the bench-top
tool.
Avoid awkward
operations
and hand positions
where a sudden
slip could cause
your hand to move into the cutting,
drilling, or sanding area of the tool.
Never sit, stand, or climb on this adjustable work stand. It is not designed or
constructed
to accommodate
this type of use. It could tip over, causing serious injury.
Do not store any items above or near the adjustable
work stand, especially
when
it is set up with a power tool attached.
Never use this adjustable
work stand as a ladder or scaffold.
ADDITIONAL
RULES FOR SAFE OPERATION
WARNING:
BE SURE to read and understand
all instructions
in this Manual
and the Tool's Operating
Manual before using the tool on this adjustable
work
stand. Failure to follow all instructions
listed below may result in electric shock,
fire and/or serious personal injury.
Know your Adjustable Work Stand and the power tool you are using with it. Read
both operators'
manuals carefully. Learn the applications
and limitations, as well as
the specific potential hazards related to the tool mounted on the adjustable work
stand. Following this rule will reduce the risk of electric shock, fire or serious injury.
ALWAYS wear safety glasses or eye shields when using power tools. Everyday
eyeglasses
have only impact-resistant
lenses; they are NOT safety glasses.
22335
ManualRevised
07-1203
Page 8
Advertisement
