Advertisement
Use only accessories
that are recommended
for the tool being used.
Accessories
that may be suitable for one tool may become
hazardous
when
used on another tool.
ELECTRICAL SAFETY
Grounded tools
In the event of a malfunction
or breakdown,
grounding
provides a path of least
resistance
for electric current to reduce the risk electric shock. This stand is
equipped with an electrical
cord that has an equipment-grounding
conductor
and
a grounding
plug. The plug must be plugged into a matching
outlet that is properly
installed and grounded
in accordance
with all local codes and ordinances.
Do not modify the plug provided.
If it will not fit into the outlet, have the proper
outlet installed
by a qualified electrician.
Improper
connection
of the equipment-grounding
conductor
can result in a risk
of electric shock. The conductor
with a green-colored
outer insulation cover,
with or without yellow stripes,
is the equipment-grounding
conductor.
If repair or
replacement
is necessary, do not connect the equipment-grounding
conductor
to a live terminal.
Check with a qualified
electrician
or service personnel
if the grounding
instructions
are not completely
understood,
or if in doubt as to whether
the tool
is properly grounded.
Use only 3-wire extension
cords that have 3-prong
grounding
plugs and 3-pole
receptacles
that accept
the tool's plug.
Repair or replace a damaged
or worn cord immediately.
This tool is intended for
use on a circuit that has an
outlet that looks like the one
illustrated
in Sketch A in the
figure to the right. The tool
has a grounding
plug that
looks like the plug illustrated
in sketch A in the figure to the
right. A temporary
adapter,
which looks like the adapter
illustrated
in Sketch B and C,
may be used to connect
this
plug to a 2-pole receptacle,
as shown in Sketch B, if a
properly
grounded
outlet is
not available. The temporary
Metal
_C._cLn_ingPin
_<c_
Cover of Grounded
C,
Outlet Box
Grounding Means
adapter should be used only until a properly grounded
outlet can be installed
by
a qualified electrician.
The green-colored
rigid ear, lug, and the like, extending
from the adapter must be connected
to a permanent
ground, such as a properly
grounded
outlet box.
22335
ManualRevised
07-1203
Page 6
Advertisement
