Advertisement
Use the proper extension
cord.
Make sure that your extension
cord is good condition.
When using an extension
cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized
cord will cause a drop in line
voltage resulting in loss of power and overheating.
Minumum
Gauge for Extension Cords
Volts
Total Length of Cord in Feet
120V
25ft.
50ft.
100ft.
150ft.
Ampere Rating
AWG
AWG
AWG
AWG
More than 0
18
16
16
14
Not more than 6
More than 6
18
16
14
12
Not more than 10
More than 10
16
16
14
12
Not more than 12
More than 12
14
12
Not Recommended
Not more than 16
Circuit Breaker
Your adjustable
work stand is equipped
with a manual-reset,
switch-assembly
overload protector. The overload
protector
is designed
to stop the current to the
switch assembly
when the switch assembly
current exceeds
a safe level.
When the switch assembly
is overloaded,
the circuit breaker will trip.
After cooling to a safe operating
temperature,
the circuit breaker can be reset by
pressing the circuit breaker button on the side of the switch assembly.
SAFETY SYMBOLS FOR YOUR TOOL
V ..................................................... Volts
A ...................................................... Amps
Hz.................................................... Hertz
W..................................................... Watts
min.................................................. Minutes
"_
.............................................. Alternating current
................................................
Direct current
no
............................................... No-load speed
[]
.................................................. Class II construction, Double Insulated
.../min ............................................... Revolutions or Strokes per minute
.............................................. Indicates danger, warning or caution. It means
attention! Your safety is involved.
22335 Manual Revised 0L1203
Page 7
Advertisement
