Advertisement
SWITCH OPERATION
The switch
has a safety key
to help prevent accidentally
switching
the tool ON and
the unauthorized,
possibly
hazardous
use by others.
The safety key must be
completely
inserted
into the
switch before the switch
panel
can be turned ON.
Two receptacles are located
at the back of the switch
assembly (Fig. 13). One is
intended to supply power to
your tool; the other can supply
power to the a worklight,
vacuum cleaner, or other item.
The ON/OFF switch
panel
controls
power to both outlets.
To operate the switch:
1. Make sure that the safety
key is inserted
into the
switch
panel (Fig. 14).
2. To turn the power ON, lift
up the ON/OFF switch
panel (Fig. 15).
Fig. 13
Fig. 14
Fig. 15
Panel
22335 ManualRevised 07-;[203
Pasei7
Advertisement
