Craftsman 580.325610 Operator's Manual page 5

WARNING
Unintentionai sparking can result in fire or
electric shock.
WHEN ADJUSTING OR[VIAKINO R EPAIRS TOYOURGENERATOR
, Disconnect the sparkplugwirefrom the sparkplugand place
thewirewhereit camot contactsparkplug.
WHEN TESTING FOR ENGINE SPARK
• Useapproved sparkplugtester.
o DONOT checkfor sparkwith sparkplug removed.
CAUTION
Excessively high operating speeds increase risk of injury
and damage to generator.
Excessively low speeds impose a heavy load.
DO NOTtamper with governed speed. Generator supplies
correct rated frequency and voltage when running at governed
speed.
DO NOTmodify generator in any way.
NOTICE
Exceeding generators wattage/amperage capacity can
damage generator and/or eiectricai devices connected to it.
DO NOT exceedthe generator's wattage/amperage capacity, See
Don't OverloadGenerator in the Operationsection.
Stat generator and let engine stabilize before connecting
ebctrical loads,
Connect ebctrical loads in OFFposition, then turn ON for
operation.
Turn electrical loads OFFand disconnect from generator before
stopping generator.
NOTICE
Improper treatment of generator can damage it and
shorten its iife.
Use generator only for intended uses,
If you havequestions about intended use, ask dealeror contact
local service center.
Operate generator only on level surfaces.
DO NOT expose generator to excessive moisture, dust, dirt, or
conosive vapors.
DO NOT insert any obiects through cooling slots.
If connected devices overheat_turn them off and disconnect
them from generator.
Shut off generator if:
-electrical output is lost;
-equipment sparks, smokes, or emits flames;
-unit vibrates excessively.