Resetting Accessory Usage; Indicator - Carrier Infinity Control Homeowner's Manual

Accessory Status
The accessory status screen allows you to check the approximate
usage of your mechanical or electronic air cleaner, humidifier pad,
and UV lamps before routine maintenance is required. The
accessory status screen also shows your servicing dealer's name
and phone number. You may also reset the usage indicators for
your accessories from this screen.
1 Press and hold the LEFT button for two seconds to show the
status of:
- Air filter (FILTER)
- Humidifier pad (HUM. PAD)
- UV Lamps
2 Press the RIGHT button to exit.
Resetting Accessory Usage indicator
After an air filter, humidifier pad, or UV Lamp has been replaced
or cleaned, you may need to manually reset the percent used
indicator for the respective accessory.
1 Press and hold the LEFT button to access the ACCESSORY
STATUS screen.
2 Use the SCROLL button to highlight the accessory you wish
to reset.
3 Press the RIGHT button to reset the selected accessory,
4 Press the LEFT button to exit,
- OR -
5 Continue to reset accessory usage indicators as desired,