Installation Accessory - Carrier KSACN0401AAA Installation Instructions Manual

INSTALLATION ACCESSORY

PREPARATION BEFORE INSTALLATION
1. Confirm the following required parts have been supplied (see Table 3).
No.
1
2 Installation and owner's manual
3
4
5
6
7
8 The connection cable
9
10
NOTE:
Extension wire available through RCD (Replacement Components). Part Number: 17401204000769.
For 40MHH High Wall follow the instructions on the installation manual of the indoor unit.
2. Prepare the following assemblies on site.
No. NAME
1 Switch box
Wiring tube (insulating sleeve and
2
tightening screw)
NAME
Wired controller
Screws
Wall plugs
Screws
Plastic screw bars
Battery
Adapter Board
Display Board
Table 4—Assemblies
Table 3—Parts
QTY.
1
1
3
3
2
2
1
1
1 Required for High Wall 40MAQ/619P*B
1 Required for High Wall 40MAQ/619P*B
QTY. (EMBEDDED
INTO WALL)
1
1
6
REMARKS
M4X20 (for mounting on the wall)
For mounting on the wall
M4X25 (for mounting on the switch box)
For fixing on the switch box
19 feet (6 meters)
SPECIFICATION (ONLY
FOR REFERENCE)
REMARKS