Canon PowerShot SX10 IS User Manual page 63

Hide thumbs Also See for PowerShot SX10 IS:

263

® [Flash Control] will not display when the flash is turned off

Before making flash settings, turn the flash on.

• When an exiernaJ flash is mounted, you cannot make built-in

flash settings.

® When adjusting flash exposure compensation

with the

camera

set the ex[ernaJ flash's exposure compensation

[+o]1

• If the external flash has been set to stroboscopic

flash, the

flash's set up menu cannot be selected (580EX II only).

o When [Wireless Func.] is setto [On], [Shutter Sync.] canno[

be set to [2nd-curtain].

Even if you set [Shutter Sync.] to

[2nd-curtain] with the camera, it will change to [1st-curtain].

® For continuous

shooting, the flash can be in quick flash

mode (pilot lamp lit green). In tNs case. light emBsion may

be smaller than with full flash (pilot lamp lit red).

o The focus bracketing mode and the AEB mode cannot be

used for flash 3hotography. If the flash fires, only one image

gets recorded.

® Flashes (especially highwoltage

flashes) or flash

accessories

made by other manufacturers

may override

certain camera functions or cause a camera malfunction.