Canon PowerShot SX10 IS User Manual page 33

J233
range.
The camera may be set to an
unintended function (such as macro or
........................... manual focus). Cancel the setting: ....
The subject is hard to ® Use the focus lock, AF lock or manual
focus on. focus to shoot (p. 125).
insufficient light for
shooting.
@Ra se the bu to n flash to _ (Flash
on) (p. 72).
¢_5 Use a high-output externally mounted
flash.
underexposed because positive (+) setting (p. 134).
the surroundings are too ® Use the AE lock or spot metering
bright, functions (p. 137).
Subject is too far away for ® Shoot within correct flash range of the
flash to reach, subject when using the built-in flash
(p. 269).
® Raise the ISO speed and then shoot
(p. 84).
Subject is too close, _ Shoot within correct flash range of the
making the flash too subject when using the built-in flash
strong. (p. 269).
® Adjust [Flash Exp. Comp] or [Flash
Output] in the [Flash Control] menu
(p.110).
_ Set the safety FE to [On] (p. 111 ).
The subject is _ Set the exposure compensation to a
overexposed because the negative (-) setting (p. 134).
surroundings are too dark. _ Use the AE lock or spot metering
functions (p. 137).
,-4
d_
oo