Canon PowerShot SX10 IS User Manual page 54

2 41
_Using the Power Kits (Sold Separately)
Using Rechar_eabl÷ Batteries
(Battenj and Charger K_t CBK4-300)
This kit includes a battery charger and four rechargeable AA=size
NiMH (nickel metal hydride) batteries. Charge batteries as shown
below.
To a power outlet
Charge Indicator
° After inserting the batteries, plug the charger (CB=5AH) into an outlet,
or attach the power cord to the charger (CB=5AHE, not shown) and
plug the other end into an outlet.
° Do not insert and charge additional batteries once charging has
begun.
° The charge indicator blinks while charging, then remains lit when
charging is finished.
_ • The CB-5AH/CB-5AHE battery charger can only be used to
charge Canon AA=size NiMH batteries NB-3AH.
® Do not mix batteries with different purchase dates or
different charge states. When recharging batteries, always
recharge all four of them at the same time
® Do not attempt to recharge fully charged batteries, as doing
so may reduce or impair battery performance. Also, do not
charge batteries for more than 24 consecutive hours.
® Do not recharge batteries in enclosed areas that tend to
retain heat.