Canon PowerShot SX10 IS User Manual page 47

247
Equipment ]
• Do not get the camera caught on other objects or subject it to
strong impacts or shocks when wearing or hoJding it by the
neck strap.
• Be carefuJ not to bump or strongly push the end of the Jens.
The above-mentioned couJd lead to injury or damage the equipment.
• Be carefuJ not to allow dust or sand into the camera when
using it at a beach or pJace with strong winds.
Such conditions couJd Jead to damage.
• Do not store the equipment in humid or dusty areas.
• During shooting, do not affow metal objects (such as pins or
keys} or dirt to contact the charger terminaJs or pJugo
Such conditions couJd lead to fire, eJectricaJ shock or other damage.
• Avoid using, placing or storing the equipment in places
subject to strong sunlight or high temperatures, such as the
dashboard or trunk (boot} of a car.
m Do not use the equipment in a manner that exceeds the rated
capacity of the eJectricaJ outJet or wiring accessories. AJso, do
not use the equipment if the cabJe or plug is damaged, or if the
pJug is not fuffy inserted into the power outlet.
m Do not use in locations with poor ventilation.
The above-mentioned can cause leakage, overheating or explosion,
resulting in fire, burns or other injuries. High temperatures may also
cause deformation of the casing.
m When not using the camera for extended periods of time,
remove the batteries from the camera and store the equipment
in a safe place.
If the batteries are left inside the camera, damage caused by leakage
may occur.
• Do not connect compact power adapters or battery chargers to
devices such as eJectrical transformers for foreign traveJ
because it may Jead to malfunctions, excessive heat
generation, fire, etectric shock or injury.
C2.