Canon PowerShot SX10 IS User Manual page 11

211
_Pewer Saving Function
This camera is equipped with a power saving function, which can
automatically turn off the power or LCD monitor (or the viewfinder)=
Auto Power Down
Display Off
When set to [On], the power will shut off in the
following circumstances. Press the power button again
to restore power.
Shooting mode: Approximately 3 minutes after the last
control is accessed on the camera.
Playback mode or when connected to a printer:
Approximately 5 minutes after the last control is
accessed on the camera.
In shooting mode, the LCD monitor (or the viewfinder)
automatically turns off after the selected time if no
control is accessed, regardless of the [Auto Power
Down] setting. Press any button other than the power
button or change the camera orientation to turn the
LCD monitor (or the viewfinder) back on.
Select [Power Saving].
!, Press the MENU button=
2, Use the 4" or €, button to select the
[_ menu=
3. Use the 4_ or ¢, button to select
[Power Saving]=
4. Press the {_"_ button.
¢Q
¢Q
1. Use the 4_ or 4_ button to select an
option=
2, Use the @ or
_
button to make
settings=
3o Press the MENU button.