Canon PowerShot SX10 IS User Manual page 51

251
Mem0 cards areh gh-prec sion eUectron c devices. Donot
bend them, apply force to them, or subject them to shocks or
vibration.
• Do not allow dirt, water or foreign objects to contact the
terminals on the back of the memory card. Do not touch the
terminals with your hands or metat objects.
• Do not peel away the original label on the memory card or
cover it with another labeJ or sticker.
• When writing onthe memory card, donot usea pencil or .............
ballpoint pen. Only use a soft point pen (e.g. felt=tip pen}.
• Do not use or store memory cards in the following locations.
• Locations subject to dust or sand
• Locations subject to high humidity and high temperatures
• Since some or all of the data recorded on the memory card
may be corrupted or erased by electrical noise, static
eJectricity, camera or memory card maffunction, making a
backup copy of important data is recommended.
• Please note that formatting (initializing} a memory card erases
aH data, including protected images.
• You are recommended to use memory cards that have been
formatted in your camera.
• When the camera is malfunctioning, a corrupted memory card might
be the cause. Reformatting the memory card may solve the problem.
• Memory cards formatted in other cameras, computers, or peripheral
devices may not operate correctly in this camera. When that
happens, reformat the memory card with this camera.
• If formatting in the camera does not work properly, turn the
camera off and re-insert the memory card. Then turn the
camera back on and format again.
x