Recording From Digital Video Devices (Dv Dubbing) - Canon Optura Xi Instruction Manual

Recording from DNgNtal VNdeo []
Devices (Dr Dubbing)
You can record from other digital video devices equipped with a DV terminal with
virtually no loss in picture and sound quality.
H O When recording from digital video devices, make sure that "AV _ DV" is not
displayed on the screen. If "AV_ DV" is displayed, change the setting
([ZZI 102).
O Anomalous signals sent from the connected device may be recorded as
anomalous picture (although it may not appear so on the screen), or it may not
be recorded at all.
O Copyright protected signals cannot be recorded.
O Blank sections may be recorded as anomalous picture.
O If the picture does not appear, reconnect the DV cable or turn the camcorder
off and back on again.
0 You can only record signals from devices with the ]]1_ _r logo recording in BD
system in SPor LPformat.
0 You can connect only one device with the DV cable.
0 You can use the camcorder for playback and recording without reconnecting
the DV cable.
ill ............................. !!
1. Connect the camcorder to the digital video device.
Bee d-onnecting a Digita/ Video Device ([_3 97).
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
"DV IN" appears.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected Device: Play back the tape.
6. Press the _/|11 button when the scene you wish to
record appears.
7. Press the [] button to stop recording.
• Pressthe l_/l| button to pause recording.
• Pressthe _/l| button again to restart recording.
8. Connected Device: Stop playback.
<9
m
9£