Selecting The Drive Mode - Canon Optura Xi Instruction Manual

Selecting the Drive Mode [] []
You can choose between three drive modes (recording modes).
Continuous Captures a quick series of still images while you press
the PHOTO button.
AEB (Auto Exposure Bracketing) Captures a still image in three different exposures
just by pressing the PHOTO button once.
Single Records a single still image when you press the
PHOTO button.
Continuous Shooting
You can capture a quick series of still images with the continuous shooting function.
1. Set the camcorder to CARD CAMERA mode.
2. Open the menu and select [CAMERA SET UP]. Select [DRIVE MODE], set
it to [CONT. od_] and close the menu.
"_" appears on the screen.
3. Press and hold the PHOTO button to record the still images.
A series of still images will be recorded.
4. Release the PHOTO button to end recording.
O Maximum number ofcontinuous shots at one time:
Stilllmage Size
1832 x 1224
1280 x 960
840 x 480
Built-in flash
Flash OFF/ON
Flash OFF
Flash ON
Flash OFF
Flash ON
Frames per
Second
2 frames
3 frames
2 frames
3 frames
2 frames
Maximum Number
of Continuous Shots
1Oimages
10 images
10 images
30 images
30 images o3
0
&
* Thesefigures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when
card is full.
OThis function can be assigned to the CSTM KEY (Q:3 53).
O The range of the flash decreases in continuous shooting mode. We
recommend recording close to the subject when using the flash.
119