Returning To A Pre-Marked Position - Canon Optura Xi Instruction Manual

Returning to a Pre.rnarked Position
If you wish to return to a particular scene
later, mark the point with the zero set
memory and the tape will stop at that point
when you rewind/fast forward the tape.
ZERO SET
MEMORY
button
REW _ button
PLAY _ button
FF _ button
STOP [] button
l ii
1. Press the ZERO SET MEMORY button at the point
you wish to return to later.
• "0:00:00 I'_" appears.
• To cancel, press the ZEROSETMEMORY button again.
2. When you have finished playback, fast forward or
rewind the tape.
• "RTN _I_" or "4< RTN" appears.
• The tape stops automatically at "0:00:00".
• The tape counter changes to time code.
0 Time code and tape counter display may not match accurately.
0 The zero set memory may not function correctly when blank sections exist on
the tape.
0 If you remove the tape, the zero set memory is canceled and the counter
display shows the time code.
tD
95