Canon imageCLASS MF6500 Series Basic Manual page 72

:tern
View
Niter Clear
ON/OFF
_ Settings
,set Collate Stop
Start
I
Dial the recipient's fax number with
the numeric keys.
Ex.
TEL=012XXXXXXX
• You enter a wrong number:
Go back to the wrong digit with [4 = ]. Or
press [Clear] to delete the entire entry.
Then try again.
Press [Start].
When you set the documents on the platen glass, press
[ _ _ ] or [ + _ ] to select the document size, then
press [Start] for each document. When scanning is
complete, press [OK] to start dialing.
If the output paper in the recipient's machine is not equal
to the scanned size, the original image may be reduced
in size or divided into smaller parts before it is sent.
• You want to cancel sending:
Press [Stop] on the operation panel.
When the <STOP KEY PRESSED>
message appears, press [OK].
When the <CANCEL DURING TX/RX?>
message appears, select <YES> with
[_,-].
4-2