4. ETHERNET DRIVER
Specifies the type of network connection.
1. AUTO DETECT
Selects the detection method of Ethernet driver.
AUTO
Sets the machine to determine the communication
mode
(Half duplex/Full duplex) and Ethernet type (10Base-T/
100Base-TX) automatically.
MANUAL
Sets the communication
mode and Ethemet type manually.
1. DUPLEX
Selects the communication
mode.
- HALF DUPLEX
-
FULL DUPLEX
2. ETHERNET
Selects the Ethernet type.
TYPE
-
10 BASE-T
-
100 BASE-TX
5. VIEW IP ADDRESS
Checks the current network settings.
1. IP ADDRESS
Checks the IP address.
2. SUBNET MASK
Checks the subnet mask.
3. GATEWAY
Checks the gateway address.
ADDRESS
6. STARTUP TIME SET.
Sets the time period required to delay the startup of network
communications for the machine (0-300 sec.).
d_
09
d_
13-34