Canon imageCLASS MF6500 Series Basic Manual page 160

!i ! !!!!!!!t ....
PLEASE WAIT
RECEIVED IN MEMORY
START AGAIN
STOP KEY PRESSED
PRESS OK KEY
This message appears when
turning on the main power
switch, or when the machine
is not ready for printing.
The machine received the
fax in memory because
paper or toner ran out, paper
jams occurred, or incorrect-
size paper was loaded.
- A transmission error
occurred because the line
condition was poor.
- The paper jammed or ran
out during printing a
report.
[Stop] has been pressed
while scanning the
document using the ADE
Wait until the message
disappears.
Load the correct-size paper
in the paper cassette,
replace the toner cartridge,
or clear the paper jams. For
more information, see the
following:
"Setting Paper Type and
Size," on p. 3-8
"Replacing the Toner
Cartridge," on p. 11-12
"Clearing Jams," on p. 12-1
- Check the line condition,
then try again.
- Clear the paper jam, or
replenish the paper, then
try again.
Press [OK], then set the
document again.
=s
o
12-10