Canon imageCLASS MF6500 Series Basic Manual page 163

# i !! ! ! !!!!!!!!!
#0005
#0009
#0012
- The other fax machine did not
respond within 35 seconds.
- The other party may not be using
a G3 fax machine.
The paper has run out or the paper
cassette is not set properly.
You could not send because the
other party's fax machine is out of
paper.
There is no reply when you redial.
You could not send, because your
fax signal was not returned as the
other party's line was engaged.
#0018
Send the document again.
Contact the other party and have
them check their fax machine. If
you are making an overseas call,
add a pause to the number.
Check with the other party and
send the document to a
G3 fax machine. If the other party
does not have a G3 fax machine,
try sending your document using
a transmission mode the other
party's fax machine supports.
Load the paper or reset the paper
cassette properly.
Contact the other party and ask
them to load the paper.
Check that the other party's line is
not engaged and try again from the
beginning.
#0037 The memory is full. Print, send, or delete any
documents stored in memory.
#0995 Communication reservation is If necessary, try again from the
cleared, beginning.
O3
"5
O
..c
03
£
}--
12-13