Lamp Status Read Command; Cr_Lamprepl Command; Cr_Lamph Command; Cr_Lampcorresph Command - Sanyo PLC-WXU300 - 2500 Lumens Manual

PLC-WXU300 Expand Serial Command Functional Specifications

9.9 Lamp Status Read Command

9.9.1

CR_LAMPREPL Command

Command "CR_LAMPREPL"[CR]
Details Get information of Lamp Replacement time
Acceptable
Response %1
Unacceptable
9.9.2

CR_LAMPH Command

Command "CR_LAMPH"[CR]
Get total running time of lamp by hour (h)
Details
*Actual running time, not corresponding value
Acceptable
Response %1
Unacceptable
9.9.3

CR_LAMPCORRESPH Command

Command "CR_LAMPCORRESPH"[CR]
Get total running time of lamp by hour (h)
Details
* Corresponding value, not actual running time
Acceptable
Response %1
Unacceptable
9.9.4

CR_LAMPMODE Command

Command "CR_LAMPMODE"[CR]
Details Get setting status of Lamp Mode
Acceptable
Response %1
Unacceptable
"000_%1"[CR]
"1Y" -------------------------- Over lamp replacement time
"1N" -------------------------- Within lamp replacement time
"1" means the number of lamps.
(1 lamp model→ "1")
"Y"/"N" means if it has reached its replacement time or not.
e.g. "1Y" -----------projector is 1 lamp model and Lamp is over its
replacement time
"Error code"[CR]
"000_%1"[CR]
"00000"~"99999"
"Error code"[CR]
"000_%1"[CR]
"00000"~"99999"
Error code"[CR]
"000_%1"[CR]
"NORMAL" -------------- Lamp Mode is Normal
"ECO" -------------------- Lamp Mode is Eco
"Error code"[CR]
59/72