Cf_Input1 Command; Cf_Input2 Command; Cf_Input3 Command; Cf_Input4 Command - Sanyo PLC-XU116 - 4500 Lumens Manual

PLC-XU116 Expand Serial Command Functional Specifications
8.6.3

CF_INPUT1 Command

Command "CF_INPUT1_%1_"[CR]
"ANALOG" ----------Select Analog RGB Input
%1 "YPBPR" ------------- Select Component
"SCART" ------------- Select SCART
Select Computer 1 input and source specified by %1 at the same time.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.4

CF_INPUT2 Command

Command "CF_INPUT2_%1_"[CR]
"DIGITAL" -----------Select DVI Input
%1 "HDCP" --------------Select DVI HDCP Input
"ANALOG" ---------- Select Analog RGB Input
Select Computer 2 input and source specified by %1 at the same time.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.5

CF_INPUT3 Command

Command "CF_INPUT3_%1_"[CR]
%1 "VIDEO" ----------------- Select Composite video Input
Select Videoinput.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.6

CF_INPUT4 Command

Command "CF_INPUT4_%1_"[CR]
%1 "S-VIDEO" -------------- Select S-video Input
Select S-Video input.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.7

CF_INPUT5 Command

Command "CF_INPUT5 _%1"[CR]
%1 "Network" ------ Select Network
Select Network.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
26/72