Lamp Mode Read Command - Sanyo PLC-WL2500A Manual
Basic serial command specifications
Hide thumbs
Also See for PLC-WL2500A:
- Service manual (104 pages) ,
- Owner's manual (78 pages) ,
- Manual (73 pages)
Table of Contents
Advertisement
PLC-WL2500A/WL2501A/ WL2503 A Basic Serial Command Specifications
7.9. Lamp Mode Read Command
Command
"CR7" [CR]
Get lamp mode status.
Detail
For 1 lamp projector, get if it is lighting or not.
Acceptable
Response
Unacceptable
"%1" [CR]
"00" [CR]=Light is out.
%1
"01" [CR]=Light is on.
"ÿ "[CR]
25/25
Advertisement
Table of Contents
