Computer 1 Rgb (Scart) Command; Computer 1 Component Command; Auto Pc Adj. Command; Presentation Timer Command - Sanyo PLC-WL2500A Manual

PLC-WL2500A/WL2501A/ WL2503 A Basic Serial Command Specifications

6.52. Computer 1 RGB (SCART) Command

Command "C51"[CR]
Select Scart input in Computer1.
Detail Although projector returns "OK", Input search is not executed with this command
while Input search is set to On1/On2.
Acceptable
Response
Unacceptable

6.53. Computer 1 Component Command

Command "C54"[CR]
Select Component input in Computer1.
Detail Although projector returns "OK", Input search is not executed with this command
while Input search is set to On1/On2.
Acceptable
Response
Unacceptable

6.54. AUTO PC ADJ. Command

Command "C89" [CR]
Execute Auto PC Adj. function.
This command works the same as "AUTO PC ADJ." button of the remote control.
Detail
Sending the command during Auto PC Adj. operation stops the operation. This is
the same operation as "AUTO PC" button of the remote control.
Acceptable
Response
Unacceptable

6.55. PRESENTATION TIMER Command

Command "C8A" [CR]
Execute Presentation Timer.
Detail
This command works the same as "P-TIMER" button of the remote control.
Acceptable
Response
Unacceptable

6.56. PRESENTATION TIMER (Exit) Command

Command "C8B" [CR]
Exit Presentation Timer menu.
Detail This command works the same as holding on the "P-TIMER" button of the remote
control
Acceptable
Response
Unacceptable
6.57. KEYSTONE ↑Command
Command "C8E" [CR]
Detail Correct keystone distortion by reducing upper part of image.
Acceptable
Response
Unacceptable
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
19/25