Lamp Mode Read Command - Sanyo PLC-WL2503 - 2500 Lumens Manual

PLC-WL2500/WL2501/ WL2503 Basic Serial Command Specifications

7.9. Lamp Mode Read Command

Command "CR7" [CR]
Get lamp mode status.
Detail
For 1 lamp projector, get if it is lighting or not.
Acceptable
Response
%1
Unacceptable
"%1" [CR]
"00" [CR]=Light is out.
"01" [CR]=Light is on.
"ÿ "[CR]
25/25