Power On Command; Power Off Command (Quick Power Off); Power Off Command; Hdmi Command - Sanyo PLC-WL2500A Manual

PLC-WL2500A/WL2501A/ WL2503 A Basic Serial Command Specifications

6.5. POWER ON Command

Command "C00" [CR]
Power ON
When already Power is ON, nothing is done.
Detail
When sending this command during processing Countdown, Countdown is
terminated.
Acceptable
Response
Unacceptable

6.6. POWER OFF Command (Quick Power OFF)

Command "C01" [CR]
Power OFF (Standby)
When Power is OFF with ON/STAND-BY button of the projector and the remote
Detail
control, "Power OFF?" is displayed. However, as soon as this command is sent,
Quick Power OFF is executed.
Acceptable
Response
Unacceptable

6.7. POWER OFF Command

Command "C02" [CR]
Power OFF (Standby).
The command operates the same Power OFF function as ON/STAND-BY button
of the projector and the remote control.
Detail
Once this command is sent, "Power OFF?" is displayed. If this command is sent
again while it is displayed, Power OFF is executed.
When sending this command during Countdown, Countdown is terminated.
Acceptable
Response
Unacceptable

6.8. HDMI Command

Command "C04" [CR]
Select HDMI Input
Detail Although projector returns "OK", Input search is not executed with this command
while Input search is set to On1/On2.
Acceptable
Response
Unacceptable

6.9. Computer 1 Command

Command "C05" [CR]
Select Computer 1 Input
Detail Although projector returns "OK", Input search is not executed with this command
while Input search is set to On1/On2.
Acceptable
Response
Unacceptable
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
11/25