Bosch NGM Series Use And Care Manual page 9

• Placeburner c apgentlyontopof basesothatthe
prongs oftheburner basefit snugly intothegroove of
theburner c ap.
Burner Base
Burner Cap
@
Matching letter
designation.
Checking Burner Cap Placement
Check to make sure there is not gap between the
burner cap and burner base. See figure "Burner Cap
Placement" on page 7 to see the correct and incorrect
placements of the burner cap.
Figure 4: Burners Caps
You may gently try to move the burner cap from side to
side to check if it is properly placed. If properly placed,
the cap will click from side to side as the prongs hit the
groove ridge.
Correct Burner Cap Placement Incorrect Burner Cap Placement
Figure 5: Burner Cap Placement
English 7