200Mm Fan Specifications:; The Front Tricool Led Intake Fans; The Rear Tricool Led Exhaust Fan; 120Mm Fan Specifications: - Antec Twelve Hundred User Manual

200mm Fan Specifications:

Size:
Rated Voltage:
Operating Voltage:
Input
Speed
Current
High
0.3A
800 RPM
Medium
0.17A
600 RPM
Low
0.08A
400 RPM
The Front TriCool™ LED Intake Fans:
The Twelve Hundred comes with three 120 x 25mm TriCool™ blue LED fans
which are pre-installed in front of each HDD cage to cool the hard drives. These
fans are installed so the air will be blown into the case. Each fan comes with a
speed control knob at the front of the faceplate. Turn the knob clockwise to
increase the speed. The lowest speed is 1200 rpm while the highest speed is
2000 rpm. See the following chart to get appropriate specification.
The Rear TriCool™ LED Exhaust Fan
There are two 120 x 25mm TriCool™ blue LED fans preinstalled at the rear of the
case. The fans are installed so the air will be blown out of the case. Each fan has
a three-speed switch that lets you choose between quiet, performance, or maximum
cooling. These switches are located at the rear of the case. The default fan speed
setting is Low.

120mm Fan Specifications:

Size:
Rated Voltage:
Operating Voltage:
Speed
Current
High 0.24A
2000 RPM (Max.)
Medium
1600 RPM
Low
0.13A
1200 RPM
Note: The minimum voltage to start a 120mm TriCool™ fan is 5V. We recommend
that you set the fan speed switch to High if you choose to connect the fan(s) to a
fan control device or to the Fan-Only connector found on some Antec power
supplies. A fan control device regulates the fan speed by varying the voltage,
which may start as low as 4.5V to 5V. Connecting a TriCool™ fan set on Medium
or Low to a fan-control device may result in the fan not being able to start because
the already lowered voltage from the fan control device will be further reduced by
the TriCool™ circuitry below 5V.
200 x 30mm three-speed fan
12V DC
10.8V ~ 13.2 V
Air Flow
3.80 m³ / min
(134 CFM)
3.07 m³ / min
(108 CFM)
2.34 m³ / min
(82 CFM)
120 x 25mm TriCool™ Fan
12V DC
10.2V ~ 13.8V
Input
Air Flow
2.24 m³ / min
(79 CFM)
1.59 m³ / min
0.2A
(56 CFM)
1.1 m³ / min
(39 CFM)
Static
Pressure
0.69mm-H O
2
(0.027 inch-H O)
2
0.40mm-H O
2
(0.016 inch-H O)
2
0.2mm-H O
2
(0.008 inch-H O)
2
Static
Pressure
2.54mm-H O
2
(0.10 inch-H O)
2
1.53mm-H O
2
(0.06 inch-H O)
2
0.92mm-H O
2
(0.04 inch-H O)
2
7
Input
Acoustical
Noise
Power
30 dBA 3.6 W
27 dBA 2.04 W
24 dBA 1.0 W
Input
Acoustical
Noise Power
30 dBA 2.9 W
28 dBA 2.4 W
25 dBA 1.6 W