Amana 2326194A Use & Care Manual page 8

Freezer door
1. Remove freezer handle a ssembly asshown. Keep allparts
together. See Graphic 2.
2. Remove door h inge hole plug. M ove toopposite side as
shown. See Graphic 3 .
3. Remove door h andle s ealing s crews. Move toopposite side
offreezer door a sshown. See Graphic 4.
4. Remove door s top. M ove toopposite s ide offreezer door a s
shown. See Graphic 5 .
5. Position f reezer handle o nopposite s ide offreezer door.
Assemble handle o ndoor a sshown. SeeGraphic 2.
6. Tighten allscrews. Setaside door u ntil h inges and
refrigerator compartment door a reinplace.
Refrigerator door
1. Remove thescrew cover. See Graphic 6 .
2. Remove refrigerator handle a ssembly asshown. Keep all
parts together. See Graphic 6.
3. Remove doorhinge hole plug from refrigerator door. M ove to
opposite sidehinge hole asshown. See Graphic 3.
4. Remove door h andle s ealing s crews. Move toopposite side
ofrefrigerator door a sshown. See Graphic 4.
5. Remove door h andle s eal s crew front. M ove toopposite s ide
ofrefrigerator door a sshown. See Graphic 7 .
6. Remove door s top. M ove toopposite side ofrefrigerator door
asshown. See Graphic 5.
7. Position r efrigerator handle o nopposite side ofthe
refrigerator doorasshown. See Graphic 6.Drive toptwo
screws i nhandle f irst. A lign lower p ortion o fhandle a nddrive
bottom screw.
8. Replace screw cover. See Graphic 6.
9. Tighten allscrews. Setaside refrigerator door u ntil b ottom
hinge isinstalled onrefrigerator.
Style 2 - Contoured
Graphics follow these instructions.
Round-Head Door Handle
Handle Screw Screw Hole Plug
Cabinet
1. Remove 5/lO"hex-head hinge screws from handle side and
move them to opposite side. See Graphic 1-1.
2. Remove cabinet hinge hole plugs from the cabinet top and
move them to opposite side hinge holes as shown. See
Graphic 1-2.
Doors
1. Remove door hinge hole plug from top of freezer door. Move
to opposite side as shown. See Graphic 2.
2. Remove door stop from both the freezer and refrigerator
doors and move to the other side. See Graphic 3.
Replace Doors and Hinges
NOTE: Graphic may be reversed if door swing is reversed.
1. Replace the parts for the bottom hinge as shown. Tighten
screws. Replace the refrigerator door.
NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
to hold the doors in place while you are working.
2. Assemble the parts for the center hinge as shown and tighten
all screws. See Center Hinge graphic. Replace the freezer
door.
3. Assemble the parts for the top hinge as shown. See Top
Hinge graphic. Do not tighten screws completely.
4. Line up the doors so that the bottom of the freezer door
aligns evenly with the top of the refrigerator door. Tighten all
screws.
Final Steps
1. Check all holes to make sure that hole plugs and screws are
in place. Reinstall top hinge cover. See Top Hinge graphic.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug into a grounded 3 prong outlet.
3. Reset the controls. See "Using the Controls."
4. Return all removable door parts to doors and food to
refrigerator.