Lexmark Pro5500 Series User Manual page 11

About your printer
Use the
9 Exit bin
10 Bin extender
11 Printer control panel with
touch screen
Use the
1 Customer support
label
2 Scanner glass
3 Power supply with port Connect the printer to the power cord.
4 Duplex unit
5 USB port
6 Ethernet port
7 LINE port
To
Hold paper as it exits.
Note: For the printer to be ready for any print job, make sure to fully extend the exit
bin and to flip out the bin extender.
Catch the paper as it exits.
Note: For the printer to be ready for any print job, make sure to fully extend the exit
bin and to flip out the bin extender.
Operate the printer.
To
Identify the model number of the printer, the customer support hot line, and the ink
cartridge information.
Scan, copy, or fax photos and documents.
•
Print on both sides of a sheet of paper.
•
Access paper jams.
Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging in or
removing a USB cable or installation cable.
Note: Remove the sticker to access the port.
Connect your printer to a computer, a local network, an external DSL, or a cable modem.
Connect the printer to an active telephone line through a standard wall jack (RJ‑11), DSL
filter, or VoIP adapter, or any other adapter that allows you to access the phone line to send
and receive faxes.
11