Advertisement
Quick Links
1
Unpack printer
2
Remove tape and packing material from all areas of the
printer
Lexmark Pro900 Series Installation
Notes:
Place the printer near the computer
•
during setup. If you're setting up on
a wireless network, then you may
move the printer after setup is
complete.
Do not attach the USB cable until
•
prompted to do so.
The packaged printhead is shipped
•
inside the printer.
Contents may vary by model and
•
region.
Advertisement
Related Manuals for Lexmark Pro900 Series
Summary of Contents for Lexmark Pro900 Series
- Page 1 Lexmark Pro900 Series Installation Unpack printer Notes: Place the printer near the computer • during setup. If you're setting up on a wireless network, then you may move the printer after setup is complete. Do not attach the USB cable until •...
- Page 2 Lexmark Pro900 Series Installation Install paper tray 2 Note: You can use an optional tray (tray 2) to increase the paper loading capacity of the printer. Open printer and remove packaged printhead...
- Page 3 Lexmark Pro900 Series Installation Close printer Pull tray 1 completely out of printer...
- Page 4 Lexmark Pro900 Series Installation Move paper guides to the sides For A4 or Legal, extend paper tray Load paper and adjust paper guides Note: Do not load paper past the maximum height indicator line as shown in step 2.
- Page 5 Lexmark Pro900 Series Installation Insert paper tray Note: Repeat the paper loading steps to load tray 2. Connect power cord only Note: DO NOT attach the USB cable yet. CAUTION—POTENTIAL INJURY: Read the safety information included with this product before connecting power or making any cabling connections.
- Page 6 Lexmark Pro900 Series Installation Follow prompts on the printer control panel Follow the prompts on the printer control panel. After following the prompts, click Continue below. Install printhead and ink cartridges If you need to install the printhead and cartridges, click Continue.
- Page 7 Lexmark Pro900 Series Installation Squeeze and lift latch Remove printhead from disposable container Insert printhead and close latch until it clicks...
-
Page 8: Close Printer
Lexmark Pro900 Series Installation Close printer Open printer Note: The printhead moves to the cartridge installation position as shown. - Page 9 Lexmark Pro900 Series Installation First, insert each color ink cartridge. Then, use two hands to install black cartridge. Close printer...
- Page 10 Lexmark Pro900 Series Installation Flip and extend exit tray paper stop Notes: Extend the paper exit tray for • A4/Legal. The paper stop holds paper as it exits • the printer. Touch OK to print alignment page Notes: Do not remove the page until •...