Table of Contents
Advertisement
Product Support Guide
Version 1.1 (01/08/08)
4. [ ] x 4 times> "5000"> [#Enter]
5. [ ] twice> "5200"> [#Enter] x 3 times
PRINT SMC
5200
6. [#Enter]
PRINT SMC
EXEC
7. [#Enter]> "RUNNING"
• Wait for the report to print (it does not start immediately).
• Printing requires about 2 min.
8. [Escape] x 3 times> [ ] or [ ]> "End"> [#Enter]> Machine switches off.
9. [Power] to switch the machine on.
Here is a brief summary of what is listed in the Engine Summary Chart.
Heading
MODEL
SER_NO
DUMMY_NO
Firm Ver
SENSOR 1
SENSOR 2
SENSOR 3
SP No, Name, Value
XVII. Firmware Update
By performing firmware updates, you are allowing your printer to obtain the newest internal control software
available that provides improved operation.
This machine has three firmware modules. Update them in the following order:
• Printer
• Ethernet Board (Can be updated only if the network interface board is installed.)
• Master Controller
The printer must be connected to the PC via a USB cable. These firmware modules cannot be updated over a
network.
One of the following operating systems is required:
1. Windows 98 SE
2. Windows ME
3. Windows 2000
4. Windows XP
5. Windows Server 2003
6. Windows Vista
MODEL: J015
Meaning
Number of the Printer Model
Printer Serial Number
See details below.
SP number, name, value of current
setting
20
- Quick Links:
- General Information
- Service Tables
Hide quick links:
Advertisement
Table of Contents
