Tray Linking Does Not Work - Konica Minolta bizhub 3300P User Manual

Tray linking does not work

Note: The trays and the multipurpose feeder do not automatically detect the paper size. You must set the
size from the Paper Size/Type menu.
Action
1. From the Paper menu, set the paper size and type to match the paper
loaded in the trays to be linked. To access the Paper menu, do either of the
following:
- If the printer is on a network, then open a Web browser and type the
printer IP address in the address field. Then navigate to Settings
>Paper Menu.
Note: If you do not know the IP address of the printer, then print a
network setup page and locate the IP address in the TCP/IP section.
- If the printer is connected to a computer by a USB cable, then open the
Local Printer Settings Utility for Windows or Printer Settings for
Macintosh.
Note: The paper size and type must match for trays to be linked.
2. Resend the print job.
Do the trays link correctly?
User's Guide
- 195 -
Yes No
The problem Contact
is solved. technical
support.