Konica Minolta bizhub 3300P User Manual page 147

Non-Printer Manufacturer imaging unit, see User's Guide [33.xy]
- Blinking
- Blinking
- Blinking
- Blinking
If the printer control panel light sequence matches the light sequence in the preceding illustration, then
the printer has detected a non-Printer Manufacturer supply or part installed in the printer.
Your KONICA MINOLTA printer is designed to function best with genuine Printer Manufacturer supplies
and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer
and its imaging components.
Warning—Potential Damage: Use of third-party supplies or parts can affect warranty coverage. Damage
caused by the use of third-party supplies or parts is not covered by the warranty.
All life indicators are designed to function with genuine Printer Manufacturer supplies and parts, and may
deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond
the intended life may damage your KONICA MINOLTA printer or associated components.
To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your
printer, press and
Note: For the list of supported supplies, see the "Ordering supplies" section of the User's Guide.
User's Guide
simultaneously for at least four seconds to clear the light sequence.
- 147 -