Incorrect Margins On Prints - Konica Minolta bizhub 3300P User Manual

Incorrect margins on prints

Action
Step 1
1. Move the width and length guides in the tray to the correct
positions for the paper size loaded.
2. Resend the print job.
Are the margins correct?
Step 2
From the Paper menu, check if the paper size setting matches
the paper loaded in the tray. To access the Paper menu, do
either of the following:
• If the printer is on a network, then open a Web browser and
type the printer IP address in the address field. Then,
navigate to Settings >Paper Menu.
Note: If you do not know the IP address of the printer, then
print a network setup page and locate the IP address in the
TCP/IP section.
• If the printer is connected to a computer by a USB cable,
then open the Local Printer Settings Utility for Windows or
the Printer Settings for Macintosh.
Does the paper size setting match the paper loaded in the tray?
Step 3
1. Depending on your operating system, specify the paper size
from Printing Preferences or from the Print dialog.
2.
Resend the print job.
Are the margins correct?
User's Guide
Yes
The problem
is solved.
Go to step 3.
The problem
is solved.
- 203 -
No
Go to step 2.
Do one or more of the following:
•
Change the paper size
setting to match the paper
loaded in the tray.
• Change the paper loaded in
the tray to match the paper
size setting.
Contact technical support.