BULK INK SYSTEM QuickConnect
•
You may want to employ the clear plastic holders to reliably prop open the printer lid so that it
remains open all of the time.
•
There may be small pockets of air in the lines after setup. If so, these will clear after a
few prints are run.
•
If the System is to be dormant for several days, use the Tube Clamps to seal the lines
at the Reservoir Box.
12
•
Make sure you install PowerDriver from the CD youreceived
with your QuickConnect
Documentation and the Video Tutorial on how to use PowerDriver.
•
Perform a Nozzle Check from PowerDriver. A few cleaning cycles
may be necessary to get a good Nozzle Check.
Installation: Tips
®
Bulk Ink System.Refer to the PowerDriver
®
Sawgrass Technologies, Inc. ~ www.sawgrassink.com