2) Print testing lines to ensure the printing head is good condition.
3) Print pictures to see whether the printing image is ok.
1) First step
Put the CISS on the left side
of the printer. In the meantime
place all the tubes at correct
2）Second step: Remove cartridge
Press the ink cartridge replace
3) Third step: Set up the Continuous Ink Supply System
Replace the spring of the
Pull out the small rubber plug
from the air hole as above
Move the cartridge-car to the cartridge
open the cover of cartridge to some
Place 4pcs of air filters into
air holes, the thicker side
is down into tank.
Unplug the power
Insert screwdriver into the place
that joint cover and cartridge-car