Installation Position - Epson OT-BZ20 User Manual

Unpacking
Open the package and confirm that it contains all of the parts listed in the
illustration. If any parts are missing or damaged, please contact your dealer for
assistance.

Installation Position

This product is recommended to be installed in the following positions.
❏
When using the printer horizontally: either side
❏
When using the printer vertically or on the wall:
either side/top/bottom (only for wall-hanging installation) *
* For the TM-T88V, the buzzer cannot be installed on the bottom
Note:
Do not install the optional external buzzer at the roll paper exit.
To prevent liquid from entering inside, it is recommended to install the optional
external buzzer so that the volume adjustment knob is positioned sideways or
downward. (For details of the volume adjustment knob, see "Adjusting the Buzzer
Volume" on page 4.)
Optional external buzzer
Horizontal
installation
Affixing tape
(1 pair, 2 pieces)
Vertical/Wall-hanging
installation
2
User's Manual
(this manual)
Can be installed on the
bottom only for wall-
hanging installation
(except for the TM-T88V).