Advertisement
3、Installation Procedures:
1) First step
Put the CISS on the left side
Pull out the small rubber plug
Place 6pcs of air filters into
of the printer. In the meantime
from the air hole as above
air holes, the thicker side
place all the tubes at correct
picture shown.
is down into tank.
position.
2）Second step: Remove cartridge
Press the ink cartridge replace
Move the cartridge-car to the cartridge
Unplug the power
button
replace position
3） Third step: Set up the Continuous Ink Supply System
Remove original cartridge
Insert our no-sponge cartridge
Close the cover for cartridge
into printer carefully
Advertisement
