Disposing Of Waste Ink - Epson SureColor S30670 User Manual

Disposing of Waste Ink

When to Dispose of Waste Ink
Be sure to replace the waste ink bottle when the following message is displayed in the
control panel.
❏ Prepare empty waste ink bottle.
❏ Replace waste ink bottle and press Z.
Caution:
c
❏ Store waste ink in a location out of reach of children.
❏ Wear protective eyewear and gloves when replacing waste ink bottle.
Should waste ink contact your skin or enter your eyes or mouth, immediately take the
following actions:
If fluid adheres to your skin, immediately wash it off using large volumes of soapy
water. Consult a physician if the skin appears irritated or is discolored.
If fluid enters your eyes, rinse immediately with water. Failure to observe this
precaution could result in bloodshot eyes or mild inflammation.
If fluid is swallowed, consult a physician immediately; do not induce vomiting.
❏ After replacing the waste ink bottle, wash your hands thoroughly.
Important:
❏ Never remove the waste ink bottle while the head is being cleaning or a head cleaning
operation is in progress. Failure to observe this precaution could cause ink to leak.
❏ The waste ink from the printer is industrial waste. Proper waste ink disposal in compliance
with the industrial waste disposal laws and ordinances of your local government is required.
Consign disposal of waste inks to an industrial waste disposer. At this point, please provide
the Waste Ink Data Sheet to the industrial waste disposer. You can download it from the
EPSON website.
The printer tracks waste ink and displays a message when the counter reaches the
warning level. Reset the waste ink counter after replacing the waste ink bottle.
Note:
If you replace the waste ink bottle before being prompted by a message in the control panel,
reset the waste ink counter using the Waste Ink Counter option in the Maintenance menu. See
"The Maintenance Menu" on page 159.
133
Maintenance