Advertisement
Attach two 1/4-20x5/8"
screws, 7mm lock washers and 7mm fiat washers on right side of fire box,
shown A. Only tighten one-fourth
of screw length, so that mounting
panel of shelf can slide between fire
box
and washers in next step. Do not fully tighten the screws.
Insert the keyhole slots on mounting
panel of burner shelf over the two screws and washers. Make sure
the tabs on shelf mounting
panel insert into cut-outs on fire box, shown B. Fully tighten the two screws.
4-20x5/8
'' Screw
y.2
_7mm
lock washer
Qty.2
7mm Flat washer
Qty.2
22°464224011
Advertisement
