Advertisement
Place bottom
shelf upside down. Insert Bent U Pin into the caster mounting
plate to lock it in place,
shown A. Spin the caster clockwise
into the threads on the bottom
shelf until secure. Remove the Bent U
Pin and repeat for remaining
casters. Make sure the two locking casters are secured at the rear and the
non-locking
casters are secured at the front. After all 4 casters are secure remove the Bent U Pin and
save for future maintenance.
Locking caster
Bent U pin
Qty.1
Bottom
U
ttach side panels to bottom
shelf using three
1/4-20xl/2"
screws, 7mm lock washers and
7ram fiat washers per panel.
IMPORTANT:
Panel with
large
hole must
be on right
side of bottom
shelf.
1/4-20xl//2
''
Qty.6
O
7mm lock washer
7mm fiat washer
Qty.6
Qty.6
screw
Left side panel
Make sure side panels
are pushed as far to the
rear of bottom
shelf as
possible before fully
tightening
screws.
screw
lock washe
fiat wash_
_
Right side panel
(with large hole)
464224011
° 15
Advertisement
