GE Profile WPDH8800 Owner's Manual & Installation Instructions page 23

Table of Contents

Advertisement

Available languages

Available languages

go.cam
Possible Cause
What To Do
Water doesnotenter
Automatic self s ystemchecks
• After STARTis pressed,the washer does several system
washer or enters slowly
checks.Water will flow severalsecondsafter STARTis
pressed.
Water supply is turned off
• Turn on both hot and cold faucets fully.
Water valve screens are
• Turn off the water sourceand removethe water connection
stopped up
hosesfrom the upper back of the washer,Usea brush or
toothpick to cleanthe screensin the machine.Reconnect
the hosesand turn the water back on.
Snags, holes, tears, rips
Pens, pencils,nails, screwsor
• Removeloose items from pockets.
or excessivewear
other objects left in pockets
Pins, snaps, hooks, sharp
• Fasten snaps, hooks,buttons and zippers.
buttons, belt buckles, zippers
and sharp objects left in pockets
Wrinkling
Improper sorting
• Avoid mixing heavy items (likework clothes)with
light items (likeblouses).
Overloading
• Load your washer so clothes have enough room
to move freely.
Incorrect wash cycle
• Hatch Cycle selection to the type of fabric you are
washing (especiallyfor easy care loads).
Repeated washing in
• Wash in warm or cold water,
water that is too hot
Grayed oryellowed
Not enough detergent
• Use correct amount of detergent.
clothes
Not using HE(high-efficiency)
• Use HEdetergent.
detergent
Hard water
• Use hottest water safe for fabric.
• Use a water conditioner like Calgon brand or install
a water softener,
Water is not hot enough
• Hake sure water heater is delivering water at
120°-140°F (48°-60°C).
Detergent is not
• Try a liquid detergent.
dissolving
Dye transfer
* Sort clothes by color, If fabric label states wash separately,
unstable dyes may be indicated.
Colored spots
Incorrect use of fabric
* Checkfabric softener package for instructions and follow
softener
directions for using dispenseE
Dye transfer
• Sort whites or lightly colored items from dark colors.
• Promptly remove wash load from washeE
Water temperature
Water supply is improperly
* Hake sure hoses are connected to correct faucets.
is incorrect
connected
House water heater is
• Hake sure house water heater is delivering water
not set properly
at 120°-140°F (48°-50°C).
Bad odor inside
Washer unused for a long time
• Leavethedoorslightlgopenforthewatertoairdry.
your washer
or not using recommended
• Run a BasketClean cycle (found in the Specialty cycle
quality of HEdetergent
Henu) with 1 cup of bleach. Seethe Coreand Cleaning/
GeneralMaintenance section.
Slight variation
This is normal
in metallic color
• Due to the metallic properties of paint used for this unique
product, slight variations of color may occur due to viewing
angles and lighting conditions.
23

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Profile gpdh8800

Table of Contents