Dell 810 Owner's Manual page 99

Figure 3-10. Front-Chassis Assembly
2
1
1 front-chassis assembly
3 USB cable
5 cable clamp
7 release tabs (2)
9 SAS cables (2)
To slide the front-chassis assembly back into the chassis:
1 Slide the assembly inside until the assembly snaps into position.
NOTE:
For proper system cooling, make sure that the cables inside the system do
not obstruct airflow.
2 Route the SAS and SATA cables along the chassis wall and the RAID
battery carrier. See Figure 3-10.
5
4
3
9
7
8
2 control panel cable
4 SAS backplane power cable
6 RAID battery carrier
8 SATA cable
Installing System Components
6
99